(4) NEW OEM DODGE JEEP TPMS TIRE PRESSURE SENSOR SENSORS 68252493AB 68105280AF
Note1:
Pls Use the vehicle fitment we’ve provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】
: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or “re-learning”.
Simplified Relearn : Auto-relearn .
Installation of TPMS is recommended to be performed only by trained professionals.
SPECIFICATION :
Manufacture Part Number ：
68105280AF
Operating Frequency:
433MHz
PACKAGE CONTENT :
4 Piece TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE
CHRYSLER 200 2015-2017
DODGE DART 2013-2016
FIAT 500X 2017
JEEP RENEGADE 2015-2017
CHRYSLER PACIFICA 2017-2019
DODGE DURANGO 2016-2019
JEEP GRAND CHEROKEE 2016-2019
JEEP RENEGADE 2017-2018
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.