DPF Catalyst Cleaner & DPF power clean
Product properties
The
DPF/Catalyst cleaner dissolves and removes all contamination and soot
residues from the particulate filter and the catalyst – no disassembling
required. The product eliminates any performance decrease or disruption
caused by contaminated particulate filter and catalysts. DPF / Catalyst
cleaner restores the complete function of the diesel particulate filter
and catalyst.
The product is also ideal for EGR-valve cleaning.
-Dissolves and removes contamination in the diesel particulate filter and catalyst.
– cleaning without dismantling
– Evaporates residue-free
Area of Application:
Cleaning of the diesel particulate filter and catalyst
Application:
Attention: The motor must be in hot operating conditions. shake the can well before use! (Approx. 1 min)
Dismantle
the temperature, pressure sensor or access port on the DPF / Catalyst
and insert the probe through the opening. spray the cleaner with the
probe inserted into the particulate filter / catalyst every 5seconds
intervals until the DPF/Catalyst is proper filled with the foam, close
the opening after application. when the cleaner has been applied the
deposits are released and dispersed in the particulate filter/catalyst.
During the normal drive operation the micro-fine dirt particles
combustion.
Restart the regeneration process through a workshop tester for DPF
cleaning. Finally remove the fault memory entry or delete existing
errors. Afterwards use the OXICAT in the fuel tank mix it with 15galons
on fuel and perform a test drive consisting of about 30 minutes.
DPF Cleaner is usable for all closed particulate filter systems. Check the
oil level before cleaning. Oil change is necessary if oil dilution is
performed with diesel.
consumption: Sufficient for one application / diesel particulate filter / Catalytic converter.
Also watch YouTube video: https://youtu.be/uBY7zCUa0iM
two products kit size: 400ml and 250ml DPF power clean